Rod Holders and Mount Guide
Scotty Holders
Powerlock (No.230)
Will accommodate all types of fishing rod and thicknesses of rod butt, twist locking system.
Baitcaster (No.280)
Ideal for baitcaster and fixed spool reels, spinning and lure rods with thinner butts, maximum butt diameter is 30mm, rubber strap locking system.
Orca (No.400)
Quick release system designed for heavy gear, this is a large rod holder.
Rodmaster II (No.350)
Drop in rod tube style holder, will accommodate all thicknesses of rod butt, no locking mechanism.
Fly Rod Holder (No.265)
Very simple but effective rod holder for the fly fisherman, rubber strap locking mechanism.
Scotty Mounts
Side Deck Mount (No.241)
This mount can be fitted flat or sideways fits some rudder track areas where rudder is not fitted. Will accommodate all Scotty rod holders and Scotty height extension bars.
W 52mm x L 100mm x H 50mm.
Bolts required to fit: 4 x M6 30mm Pan Head.
Side Deck Mount, Button Lock (No.241L)
Similar in design and size as No. 241 but with side button locking system for quick release of rod holder. Will accommodate all Scotty rod holders and Scotty height extension bars.
W 52mm x L 100mm x H 50mm.
Bolts required to fit: 4 x M6 30mm Pan Head.
Flush Deck Mount (No.244)
A rectangular low profile flush mount. Will accommodate all Scotty rod holders and Scotty height extension bars.
W 51mm x L 100mm, H 11mm above deck, Post: D 34mm, H 42mm.
Bolts required to fit: 4 x M6 25mm Pan Head.
Round Flush Mount (No.344)
Round wide foot print version of flush mount. Will accommodate all Scotty rod holders and Scotty height extension bars.
D 98mm, H 15mm above deck, Post: D 34mm, H 42mm.
Bolts required to fit: 4 x M5 25mm Pan Head.
Compact Threaded Deck Mount (No.444)
Small Scotty base, no extra fittings required to fit, hull access is required, two integrated pins lock mount on deck to stop twisting. Will accommodate all Scotty rod holders and Scotty height extension bars.
Triple Mount (No.362)
Allows the fitting of any three Scotty Rod Holders or other post mount device to one Scotty Deck Mount, Triple Mount bar has slots to accommodate tools and/or lures.
Scotty Extensions
Gimbal Mount (No.253)
Slides into standard flushmounted rod holders to allow fitting of Scotty rod holders.
8.5" Stainless Steel (No.254)
Extends the height of rod holder by 8.5", fits all Scotty mounts mentioned above.
6.5" Reinforced Nylon (No.259)
Extends the height of rod holder by 6.5", fits all Scotty mounts mentioned above.
iFly Rod Holders
Available to hold 1 - 4 fly rods, with locking security cap, perfect for bolting to your tankwell crate.
R.A.M. Holders
RAM Rod Holder RAP 117
Rod holders with easy strike design, ideal for all types and styles of rod and reel. Fully adjustable design with nylon bar locking system. Care is required when removing from ball mount, only loosen the required amount.
Bolts required to fit: 3 x M5 20mm Pan Head.
RAM Rod Holder RAM 119
Rod tube design. Fully adjustable design. Care is required when removing from ball mount, only loosen the required amount.
Bolts required to fit: 3 x M5 20mm Pan Head.
RAM Rod Holder RAP 340
Will accommodate all types of fishing rod and thicknesses of rod butt, locking security clip. Holder fixed to extension, only adjustable at base.
RAM Rod Holder RAP 341
Fly rod holder with hinged locking security clip. Holder fixed to extension, only adjustable at base.
R.A.M. Mounts
RAM Rod Holder Spare Ball Mount
Size C RAM Ball Mount to fit RAM 117 and RAM 119 Rod Holder Systems.
RAM Rod Holder Spare Scotty Mount
Converts RAM rod holder systems to fit all Scotty deck mounts.
Bison Holders
Standard rod holder, shown on Scotty base
Fly rod holder, shown on Scotty base
Bite alarm with quick release, shown on Scotty base
Bison Mount
Shown alongside compatible Scotty mount
Berkley Holders
Classic
Classic designed rod holder with twist lock collar, complete with three alternative mounts.
Quick Set
Quick release rod holder, complete with three alternative mounts.
Tube Rod Holder
White upright three tube rod holder, perfect for bolting to your tankwell crate.
Flush Mounts
Sea-Dog, Crack of Dawn etc
Will accommodate all types of fishing rod and thicknesses of rod butt.
W 85mm x L 118mm x H 14mm above deck
D 55mm, H 200mm below deck.
Bolts required to fit:
3 x M6 25mm Counter Sunk.
TENOB RO09CB
Will accommodate all types of fishing rod and thicknesses of rod butt.
W 58mm x L 100mm
D 48mm, H 235mm below deck.
Bolts required to fit:
3 x M6 25mm Counter Sunk.
Rod Leashes
Scotty Rod Leash
Coiled leash with Scotty Swivel Clips at either end, comes with rubber rod butt ring.
Crack of Dawn Leash
Adjustable bungee rod leash with quick release clip to disconnect rod from leash. Red elasticated strap and brass security clip.
Kaskazi Rod Leash
Velcro rod butt strap with bungee and plastic security clip.
