AF_BlueMaster-10-YEARS.gif
Home Projects Gallery Tournaments Safety Forum Reviews
IMGP0282.JPG

Kayak Fishing Meets and
Tournaments 2019

The list grows every year and 2019 is bigger than ever, and more of us are now competing abroad as well.

Making the decision on which to attend is getting harder and harder.... more

Kayak Projects HOBIE OUTBACK - TOURNAMENT SET UP HOBIE REVOLUTION 16 Rod Rest Anchor Trolley Fitting a Garmin EchoMAP 75sv Finder Bait Cutting Board SideKick AMA Kit Hobie Gear Bucket Camera Mounts Vantage Seat Bag Fitting YakAttack GearTrac Hobie H-Crate Hobie Gear Pockets HOBIE REVOLUTION 13 Fitting a Lowrance Fish Finder Screw Hole Repair Fitting YakAttacks GTSL90 Track System Fitting YakAttack GTSL90 with Rigging Bullets YakAttack BlackPak SeaDek Sound Proofing The Hobie Sail Kit Hobie Sail Reefing Device Hobie Rudder Upgrade CAPER Getting Started Fitting a 6" Hatch Fitting a Fish Finder Installing a Flush Rod Holder Installing a Dash Mount Compass Making a Paddle Keeper Fixtures and Fittings List TRIDENT 11 Getting Started Tankwell Hatch Mounting the Torqeedo Rudder Controls Torqeedo Controls TRIDENT 15 Fitting a RAM-117 Rod Holder Fitting a Richie Kayaker S-59 Compass Fitting a Navigation Light Fitting a Humminbird Fishfinder/GPS PROWLER 13 Prowler Seat Upgrade Fitting a Scotty Triple Rod Holder Fitting Ocean Kayak's Flush Mounts Making Rocket Launcher Style Rod Holders Installing a Fishfinder v2 Anchor Trolley System Anchor Trolley System for 2007 Prowler 13 The Crate P13 Fixtures and Fittings List MALIBU II XL Laying Out Fittings Fitting a Gaspachi Hatch Central Cargo Net 4 inch Hatch Scotty Flush Deck Mounts Malibu Rod Mounts PROJECT EXTRAS Scupper Pro Rod Pod Conversion Anchor Line Reel - Paul Fennell (Darnsarf) High Visibility Light Rod Building Hatch Accessory Bag Grapnel Anchor Bait Tank Buoy Leash Petrol Jet Drive Fitting an Eagle Fishfinder Big Game Console Scotty Double Extension Rod Holders Rod Holders and Mount Guide Fitting a Centre Hatch RAM-119SW Fly Fishing Linekurv.dk Line Tray Paddle Selector Kayak Fishing Photograph and Videography Kayak Storage Rack SCUPPER PRO

Fitting Hobie Sidekicks

If you are thinking of fitting a sail kit to your Hobie or just like the idea of the extra stability given by fitting a set of Hobie Sidekicks, you'll be pleased to know that to install them is both quick and relatively easy to do.

As the main fixing bar is a permanent feature you need to ensure that its both clear of any thing you might wish to fit in the tankwell and it doesn't interfer with your seat back and ultimately your comfort.

Sidekicks_1.jpg

Sidekicks_2.jpg

The fitted sidekicker bar showing the importants of getting the position right, we also took into account that we fit the trolley and wheels behind the seat.

Sidekicks_3.jpg

We positioned our bar above the rear of the cockpit and just infront of the tankwell.

Sidekicks_4.jpg

Once we had an idea of where we wanted it, we used the rear flush mounts as our reference point and measured from them to ensure we got the fittings square across the kayak.

Sidekicks_5.jpg

We then marked the centre of the gunwale.

Sidekicks_6.jpg

Double checked the base bar fittings position and marked the spot to drill.

Sidekicks_8.jpg

Sidekicks_8a.jpg

Using a drill bit the same size as the fixing bolts we drilled the first holes on both sides of the kayak. One hole each side.

Sidekicks_9.jpg

We then fitted the first bolts into the holes and placed the sidekicker bar across the kayak in position, this helped with the alignment for marking the second hole.

Sidekicks_10.jpg

Bar removed and second hole marked ...

Sidekicks_10a.jpg

... and drilled, the hole started with the base held in place to ensure alignment.

Sidekicks_7-2.jpg

The brackets and bar were then removed and using the pilot holes alread drilled we used a larger drill bit to accommodate the well nuts used to secure the sidekick bar brackets.

A little silicone sealant adhesive was smeared onto the well nuts before fitting to ensure a water tight fit.

Sidekicks_11a.jpg

The sidekicker bar was then centralised by taking a measurements from both sides until equal. The bolts were then tightened down.

Sidekicks_11.jpg

The sidekick bar extensions have a plastic insert with lock pin which allow the sidekicks to sit at 3 predetermined heights depending on preference, we had heard on some forum's that the bars can slip as the plastic insert is not held in place. A hole was drilled through the aluminium tubing into the plastic insert and a self-taping screw was used to secure and ensure there is no future slippage.

Sidekicks_12.jpg

We even managed to find a black headed screw to give a neat finish. Both sides were treated the same.

Sidekicks_13.jpg

We then inflated the sidekicks, they only take 4-5 large breaths to fill. They were then slipped over the bars and the security clip fitted.

Sidekicks_14.jpg

Take care with the clips, I've been advised that they are easily lost when removing the sidekicks from the bar. You've been warned.

Sidekicks_15.jpg

Job done. Photo shows the sidekicks in their lowest position which on the water would mean they were touching the water at all times.

The nice thing with the Hobie Sidekicks is that they can rotate on the bars, they are not going to dig in at sea, they will happily ride the swell and waves.

Sidekicks_16.jpg

Sidekick-GoPro_1.jpg

Since fitting the Sidekicks we have added a GoPro mount to one of them, this will give us another video angle when sailing and fishing, can't wait to give this a try.

Sidekick-GoPro_2.jpg

Pretty neat!

AnglersAfloat is sponsored by

Sponsor-list_5-2.jpg

Search

Enter search words

Follow Us

 ProBoards.jpg  facebook-icon-2.png

Contact

david@anglersafloat.co.uk

10/05/2019