• Fitting a RAM-117 Rod Holder
• Fitting a Richie Kayaker S-59 Compass
• Fitting a Scotty 444 Compact Threaded Deck Mount
• Fitting a Rudder
• Fitting a Navigation Light
• Fitting a Pacific Action Sail
• Fitting a Humminbird Fishfinder/GPS
• Finishing Touches

Disclaimer:

Installing hardware may cause damage and/or void manufacturer warranties. The information we provide is a free reference guide only. The author of this information, sponsors and the owners of the website that host this information are not liable for any problems or issues that arise from the use of this information. Users of this information hereby acknowledge that all use of this information is done by their own free will, at their own sole risk, understanding that injury or death could occur.

Ocean Kayak Prowler Trident 15

This is AnglersAfloats fifth project kayak (including 2 Prowler 13's), at last we get around to fitting a rudder, truth is none of the other projects that we have put together have required one, on the Trident 15 with it's long waterline and high windage it's hard work without it.

We're also going to rig up with a state of the art Hella Marine navigation light for our night fishing exploits. The Action Pacific sail that we were sent for the Prowler 13 Project has been given a few tweaks to make it work well onboard the Trident and it makes a very pleasant alternative to paddling home when the conditions are right.

Fishfinders are covered again, but this time utilising the Scupper Hole moulding and getting the large Humminbird 787c2i display to fit inside the Sonar Shield, and how to deal with all that extra cable.

We have also used one of Scotty's latest flush mount designs and a first for us the RAM-117 rod holder.